Open 24/7 • Same-day requests • All London • Nationwide from LondonWhatsApp +44 7453 146669
ComfortVan advice

Moving a Washing Machine: What to Prepare Before Collection

October 10, 2026

Find the washing machine’s model number and manual before moving it. You need to know how it should be drained and secured for transport, including whether the correct transit restraints are required. Another machine’s instructions may not fit yours.

Decide who disconnects it and who reinstalls it at the new address, then tell the mover when it will be ready. Measure the kitchen exit and any stairs at both ends. Those practical checks give you a preparation schedule, instead of an appliance still connected when collection begins.

1. Find the model number and manual

Photograph the appliance’s model label and find its transport and installation instructions through the manufacturer. Save the document on your phone and keep a copy available for the person preparing the machine. Check that the document matches the full model, not just the brand.

Read the sections covering draining, transport restraints, permitted orientation and installation. Some instructions refer to additional parts or a particular sequence. Make a list of what is needed before scheduling preparation. If the manual is unclear, ask the manufacturer rather than improvising.

Bosch’s moving guidance, for example, recommends replacing transit bolts for long-distance transport to secure the drum. Treat that as manufacturer guidance for relevant appliances, not proof that every machine uses the same bolt arrangement.

Front-loading washing machine before moving preparation
Illustrative stock photograph. Photo: PlanetCare.

2. Confirm ownership and the collection scope

If you rent your home, check whether the machine belongs to you or the property owner. Do not remove a supplied appliance without the necessary agreement. If buying second-hand, confirm precisely what is included: machine, hoses, manual and any transport parts.

Ask the seller whether it can be demonstrated before disconnection and record any visible damage. A delivery provider transporting the machine is not automatically verifying that it works. Keep the sale arrangement distinct from the transport agreement.

Send ComfortVan the appliance model, dimensions, any available weight information and photographs of its current position. State whether it is freestanding, built under a worktop or part of a stacked arrangement. Access and preparation can differ substantially between those situations.

3. Book suitable preparation help

Decide who will isolate supplies, drain the machine and disconnect it in accordance with its instructions. If connections are inaccessible, seized or unfamiliar, arrange competent appliance or plumbing help. A moving team should not arrive expecting a ready appliance and find an installation problem instead.

Give the person doing the work the model details and intended transport date. Ask them to leave the appliance prepared, residual water managed and the property’s connections safely addressed. Confirm any follow-up work at the old address with the responsible person.

Use a task note such as “Preparation completed by appointed installer; collection team handles transport only.” This is an example of clear responsibility, not a statement about what any provider includes. Keep the actual agreement with the booking.

4. Obtain the correct transport restraints

Check whether the original transit bolts and sleeves were retained. Where the manufacturer requires them, identify the correct parts using the model number. Bolts that look similar are not necessarily compatible, and household screws are not a substitute.

Allow time to obtain missing parts before moving day. Tell the transport provider if restraints are unavailable and ask for a decision based on the model’s instructions. Do not assume that blankets around the cabinet protect an unsecured internal drum.

Have required restraints fitted according to the manual by someone competent to do so. Keep the installation instructions together with any parts removed for transport. At the destination, the person installing the machine must know which transport restraints need removing before operation.

Washing machine: separate the responsibilities


  1. Prepare

    Read the exact model’s transport instructions and obtain required parts.


  2. Disconnect

    Agree competent help for isolation, draining and disconnection.


  3. Transport

    Confirm upright handling, protection and an assessed access route.


  4. Install

    Follow the model’s installation instructions before the first wash.

5. Survey the carrying route

Measure from the washing machine’s current position all the way to the loading point. Include the kitchen doorway, communal entrance and the space to turn on landings. Photograph a small entrance step even if the flat is described as ground floor. Repeat the check at delivery. Put these details with the model and preparation notes so the collection is assessed as one job.

Photograph the route and describe any restriction such as a narrow passage beside a fitted worktop. Share the same information for the destination. A machine being easy to remove does not mean it can be delivered to the new utility room without difficulty.

The HSE’s manual-handling guidance explains that its guidelines are not universal safe lifting limits. Avoid planning around a supposed maximum that makes the job “safe”. Leave equipment, crew and handling decisions to an assessment of the actual load and route.

Washing-machine handover checks

Check Before transport
Model instructions Find the correct manual and required transit restraints.
Disconnection Arrange a competent person where needed; do not guess at connections.
Residual water Follow the manual’s draining instructions.
At destination Complete the required installation checks and remove transport restraints as instructed before use.

6. Prepare the cabinet, hoses and paperwork

Once preparation is complete, secure loose hoses and accessories as the manual permits so they cannot trail along the floor. Do not place pressure on controls, cables or hose connections when protecting the cabinet. Ask the provider how it wants the appliance presented for collection.

Pack small accessories in a labelled bag or box and record where they are going. Keep documents readily available rather than burying them among unrelated kitchen cartons. Photograph the appliance’s external condition before protective coverings conceal it.

For an example handover note, write “Machine W01; hoses in accessory box W01; model manual saved; required transport restraints fitted.” Only mark a preparation task complete after checking it. An unchecked box is more honest and useful than a reassuring assumption.

7. Agree transport and destination arrangements

Tell the provider the handling requirements from the manufacturer and confirm whether the service is suitable. Agree the destination room, floor, access window and who will receive the item. Raise upright transport or other model-specific conditions before the job is priced.

Ask explicitly whether carrying, protective materials and any preparation work are included. Use the furniture delivery enquiry or man-and-van service page to describe the task, then obtain the actual agreed scope.

Have the destination area cleared before delivery. If fitting is booked separately, agree where the machine should wait so it does not obstruct access. Do not leave it in a communal corridor while waiting for an installer.

8. Complete the installation handover

Check the delivered item and accessories against your record. Give the installer the manual and tell them that transport restraints may be fitted. Reinstallation, levelling, supply connections and any required checks must follow the model’s instructions.

Do not run a test wash just to see whether the machine survived before it has been correctly installed. Ask the competent person handling installation to confirm readiness. Retain transport parts as recommended so a later move does not start with another search for replacements.

Common mistakes

Leaving disconnection until the van arrives can delay the move. Other avoidable problems include losing transit sleeves, packing the manual in an unlabelled box, failing to mention stairs and assuming transport includes plumbing. The simplest prevention is a written task list with a named person for each stage.

Final checklist

  • Exact model and manual identified.
  • Ownership and inclusion in the move confirmed.
  • Preparation and installation responsibilities agreed.
  • Correct transport parts checked.
  • Both access routes assessed.
  • Accessories and condition recorded.
  • Installer informed before operation.

Frequently asked questions

Can I move it without transit bolts?

Follow the exact model’s transport instructions and contact the manufacturer if required parts are missing. Do not rely on a generic answer that applies to a different machine.

Does a removals booking include installation?

Only if that work is expressly agreed and appropriate help is available. Contact ComfortVan with the appliance and access details, and confirm the transport scope before booking.

◉ WhatsApp£ Quote
◉Get our best rateWhatsApp +44 7453 146669